Radar energy that strikes dense objects will be reflected and displayed on the operator's scope thereby blocking out aircraft at the same range and greatly weakening or completely eliminating the display of targets at a greater range. It is difficult to solve the effects of anomalous propagation, but using beacon radar and electronically eliminating stationary and slow moving targets by a method called moving target indicator ( MTI) usually negate the problem. The bending of radar pulses, often called anomalous propagation or ducting, may cause many extraneous blips to appear on the radar operator's display if the beam has been bent toward the ground or may decrease the detection range if the wave is bent upward. Reflected or attenuated by dense objects such as heavy clouds, precipitation, ground obstacles, mountains, etc. “Bent” by abnormal atmospheric phenomena such as temperature inversions The characteristics of radio waves are such that they normally travel in a continuous straight line unless they are: It is very important for the aviation community to recognize the fact that there are limitations to radar service and that ATC controllers may not always be able to issue traffic advisories concerning aircraft which are not under ATC control and cannot be seen on radar. Most facilities actually have some components duplicated, one operating and another which immediately takes over when a malfunction occurs to the primary component. More reliable maintenance and improved equipment have reduced radar system failures to a negligible factor. The direction of a detected object from a radar site is determined by the position of the rotating antenna when the reflected portion of the radio wave is received. Range is determined by measuring the time it takes (at the speed of light) for the radio wave to go out to the object and then return to the receiving antenna. Radar is a method whereby radio waves are transmitted into the air and are then received when they have been reflected by an object in the path of the beam. FAA Form 7233−4 International Flight Plan
0 Comments
Leave a Reply. |